Kingfisher CL4ZFXLK60 Manual página 80

Using your hob for the first time
01 Using your induction hob
1. Touch the Master On/Off Key
NOTE: If you do not select a cooking zone and power level within one minute, the hob will switch off
automatically.
2. Place a pan suitable for induction cooking on a cooking zone; ensure that the base of the pan and the
cooking surface is clean and dry.
3. Choose the zone using
displayed.
4. Select the output using the Power / Timer slider and cooking commences. Either touch anywhere within
the slider or touch the Up arrow to go straight to 9, and the Down arrow to go straight to 0. You can
modify this any time during cooking.
Heating Zone
• If you don't choose a heat setting within one minute, the induction hob will automatically switch off. You
will need to start again at step 1.
• You can modify the heat setting at any time during cooking.
CAUTION: After use, each cooking zone will display "H" as a reminder that the
glass is too hot to touch. Though induction cooking does not generate heat, the
magnetism used to heat the pans will mean that this heat will still transfer to the
glass surface by convection. This is perfectly normal for induction hobs.
If the display flashes
• the pan is on the wrong cooking zone
• the pan is not compatible with induction hobs
• the pan is too small or not correctly centred on the zone
As a result the zone will automatically switch off after one minute.
NOTE: The control panel will not automatically switch off when "H" is displayed. When "H" disappears, the
set Stand By time will commence.
5059340445854_MNL_IN_V03.indb 79 5059340445854_MNL_IN_V03.indb 79
for two seconds and the display shows " - " for each zone.
and "0" will flash. If no power level is selected within 5 seconds, "-" will be
Normal Power
2000 W
1500 W
1500 W
2000 W
alternately with the power level setting, this means that:
Maximum Input
Boost Power
2800 W
2000 W
2000 W
2800 W
79
Power
7200 W
10-06-2022 10:33:54 10-06-2022 10:33:54