07
Cleaning method
1
PUSH
➊ Press the power switch of remote control (ON/OFF)(17) or the power switch (ON/OFF)(2) to turn off
the power.
When cleaning, turn the fixing safety screw (13) installed at the time of shipment to release the
➋
fixing, and then turn the fixing and release function handle (10) button to the left open mark to
remove the insect repellent grating (4) from the body.
➌After removing the insects attached to the grid plate (6) using the cleaning brush (19) built into the
left handle part of the separated insect insect grid case (4), insert the insect insect grid case (4) in
the reverse order and fix it. Turn the handle (10) in the right direction of Close to fix it. At this time,
you must refasten the fixing safety screw (13) that was loosened during cleaning.
➍The safety screw (13) for fixing the high -pressure grid plate for insect repellents is especially
prepared to be touched by children . After cleaning , the fixing handle (10) and the fixing safety
screw (B) for fixing the insect repellent plate must be turned to the right to fix the insect repellent
plate. It's possible
➎ The proper time to clean the Insect killer grid plate.
- Indoors : It is recommended to clean immediately or daily after use for cleanliness.
In case the space of wire on the electrode part of the high voltage grid
plate(6) is not visible due to captured flying insects. (It is recommended to clean immediately
or daily after use for cleanliness)
➏ Use the Insect killer LED lamp(8) hygienically to maintain the function of the product.
08
Storage method
01
Turn off the power switch on the machine and unplug the power cord when not in
use for a long time.
02
Unplug the power cord before cleaning the product.
03
Never touch the high voltage grid plate after the power plug is unplugged. There are
some of the high voltage currents still remaining.
04
Do not wipe the product with chemicals. (Thinner, Benzene, Gasoline, Alcohol, etc.)
It may cause a transform of the surface of the product.
05
Keep the product in a dry place after putting in a plastic cover and wrapping it in a box.
06
Keep the product after removing the battery inside the remote control when not in
use for a long time.
12
Clean Insect Killer - WingKill
2
10
13
3
Cleaning
brush
.
- Outdoors: