Idiomas disponibles
Idiomas disponibles
gB
Key (Fig. A)
Device
Bracket
Protective cap for hole when the cable is disconnected
Cable clamping hooks
Seating for cap when it is not used
Anode cable male connector
230V power supply cable connector
Anode cable female connector
G 1/2" threaded plug
Titanium rod (electrode)
Activated end (Caution: do not abrade or scratch)
BoguArD
ELECtroniC Anti-CorroSion SyStEm - Pat. Pend.-
use and installation instructions
Field of application
The Boguard impressed-current electronic anodes, fitted with a system that automati-
cally adjusts the protection potential, protect exposed surfaces from corrosion – up to
7% of the internal surface of the steel tanks and storage tanks enamelled with plastic
resins or vitrified – up to a capacity of 3000 litres.
Containers used for hot, drinking water (storage tanks and tanks) have a coating to
provide passive protection against electrochemical corrosion favoured by water. Con-
sidering that basically there is no passive anti-corrosion protection capable of providing
100% protection for the walls of a tank, an additional active barrier, called cathode
protection (DIN 4753 part 6) is required.
The traditional active protection system consists of magnesium anodes called sacri-
ficial anodes, which are still affected by inconveniences. As the magnesium anodes
wear out, they need to the replaced periodically and, in any case, over time the anode's
11
