Idiomas disponibles
Idiomas disponibles
INSTALLATION
WALL DRILLING AND BRACKET FIXING
Please read the instructions carefully.
Unpack the canopy and check that all functions are working. Ensure
that the voltage (V) and the frequency (Hz) indicated on the serial plate match the voltage
and frequency at the installation site.
Check that the area behind the installation surface to be drilled is clear
of any electrical cables or pipes, etc.
The stainless steel and glass surfaces of the canopy are very easily
damaged during installation if grazed or knocked by tools. Please take care to protect
the surfaces during installation.
Protect the cooktop surface below with cardboard, or the like, to
prevent damage occurring whilst the wall canopy is being installed above.
The manufacturer shall not be liable for failure to observe all safety
regulations in force for the correct and normal operation of electrical parts.
Choose a ve
Ex
Ve ti g k o positio
ng mode:
on-air mode
Re i ulaion mode
E t a tio -ai
the e ti g k o he e
Ci ulati g-ai
Tu
he e ea s e i ulatio
EN-5
ode: Tu
ea s e ti g outside
ode:
the e ti g k o
