Idiomas disponibles
Idiomas disponibles
Water tank cleaning
1.
Remove the power cord from the power outlet, turn the lock of the water
tank to the horizontal direction, and remove the water tank from the unit.
2.
Using your hand, rotate the fixing buckle 90° and push the water pump box
assembly down to take it out. Finally, remove the water tank. (Refer to Fig.
9 below)
3.
Using a towel and a small amount of detergent in water, clean the water
tank and remove the dirty water when you are finished.
Fig. 1: Knob closed
state
Cleaning the body of the machine
1.
Use a damp towel to clean the body of the machine. Pouring water directly
onto the machine should be strictly avoided.
2.
Do not wash with corrosive cleaners or solvents.
3.
To avoid the risk of electric shock, the power should be off and the power
cord should be removed from its power outlet when cleaning the body of
the machine.
Installation after cleaning
1.
Install the cooling pad, back filter, and water tank in that order and ensure
the installation has been carried out properly.
2.
Reconnect the power and confirm that the machine runs smoothly.
Maintenance
1.
If the machine has not been used for a long time, the power should be
disconnected and the machine should be packed to prevent dust
accumulation.
2.
Please ensure the filters are dry and that there is no water in the tank
before packing.
www.newair.com
Fig. 2: Knob opened
after rotating 90°
Fig. 3: Push down, take
out the water pump
assembly when two
feet appear and take
out the water tank.
EN
21
