Eurocave Modulotheque Instrucciones De Montaje página 13

c m ( 18)
roSS odule mv
Before locating the cross module, remove all the bottles from the top module.
FASTENINGS
a*x4
1
*No screws are provided, the
screws to be used are the
ones for the basic module.
TOOL REQUIRED
2
PARTS
Ax2
3
Bx2
Cx2
4
Front securing
guide
10
GB
WARNING !
ARRANGEMENT OF
SUPPORTS
1
Unfold the 2 support cross-pieces (A). Pull up
ends in relation to centre to form an X. Notice
that the arms of the X are NOT of equal length.
2
a: The rear support cross-piece is placed with
the long arms uppermost.
b: The front support cross piece is placed with
A
the long arms downward
SETTING UP SUPPORTS
3
Remove the 4 securing screws (a) from the
upper rack. Install the rear support at the back of
the basic module.
4
Center the rear support (a) by screwing it
onto the rear metal 135° guides (B) on the upper
rack.
5
Install the front support in front of the rear
support and centre it (a) by screwing it onto the
5
Rear securing
front metal 90° guides (C) on the upper rack.
guide
N.B.: You may expect slight play on the cross modules
inside the basic module.This is normal because
a
wood is a living material that moves with levels of
atmospheric moisture.
S
HelveS
(mv10-101/mv10l40 - mv101l40/mvmS10-1/mvmS15-151/mvmS10l40 - mvmS1l40)
Your EuroCave Modulotheque adapts to your requirements and evolves to suit your storage needs.
U S S
niverSal torage helf
(mv10-101)
Capacity: 77 bottles
U S S , f W t
niverSal liDing helf itteD ith he
"m D S " (m 10-1)
ain U ommelier vmS
Capacity: 12 bottles
U S S , f W t "m
niverSal liDing helf itteD ith he ain
D S " 40C (mvmS10l40/mvmS1l40)
U ommelier m
Capacity: 7 bottles
U S S 40 C
niverSal torage helf m
(m 10 40/m 101 40)
v l v l
Capacity: 49 bottles
m S S , f W t
agnUm liDing helf itteD ith he
"m D S " (mvmS15-151)
ain U ommelier
Capacity: 7 bottles
11
GB