Retekess TR628 Manual Del Usuario página 5

Idiomas disponibles
  • ES

Idiomas disponibles

To improve reception
FM reception
Extend the telescopic antenna (6), and adjust the direction and angle.
AW reception
Retract the telescopic antenna and rotate the unit to reorient the built-in ferrite
bar antenna.
NOTE:
• If the unit produces noise due to the influence of nearby appliances, (such as a
TV, computer, or fluorescent light), you should move the unit to another place to
listen to the radio.
• It's better not to use the DC power supply while using the radio because it may
cause noise.
Headphone
• Insert the 3.5mm headphone to the jack (14) if you need to listen with the
headphone, and the loudspeaker will automatically shut down.
• Please note that listening at loud volume for a long time will damage your ears.
Cassette Playback
Use normal position tapes.
High position and metal position tapes can be played, but the unit will not be able
to identify the characteristics of these tapes.
Method of installing tape
Insert the tape with the exposed side facing up and the playback/recording side
facing forward, the tape rotates from right to left. The cassette tape should be
placed in parallel, otherwise, the door will not be closed.
Cautions for Cassette Tape
Please make sure there is no slack in the tape before use. If there is slack,
please roll it up with a pen and other tools to remove the slack before use.
NOTE:
• If you use a slack cassette tape, it will be caught in the machine and cause
malfunction or damage.
• Do not use a tape longer than 60 minutes, because it is very thin and easy to
be pulled or caught.
• Please use TYPE1 (normal) cassette tape.
The manufacturer, seller or sales platform will not make any compensation for
losses or incidental losses caused by tapes that cannot be played or recorded
due to incorrect operations.
In Order Not to Erase the Recording Content
• There is a structure on the left and right sides at the bottom of the cassette tape
to prevent mistakes from erasing the contents of the tape. If this structure is
damaged, the tape will not be used for recording. (If forced to press the record
button will cause machine damage or malfunction)
• If you are sure that your recorded content needs to be saved, you can break
3
loading