Idiomas disponibles
Idiomas disponibles
CAMERA SETuP (continued)
(Only) if you selected "00" for the minutes setting, the last two digits will
blink ,and you can set a delay time in seconds (this is not available if you
selected from "01" to "60" minutes).
• Press "UP" or "DOWN" to change the value (Range from 05-59
seconds), press "OK" to confirm.
Next (last item in the Setup menu), you will see the SD card icon (#7) blink.
You can now check the number of files on your SD card, and format it if
desired.
4. Checking the # of Stored Photo/Video Files
• While the SD Card icon (#7) is blinking, the total number of files stored
on the SD card will be seen on the 4 digit Display (#3). This allows you
to confirm if this is a new card or one you have used previously (and
may wish to format).
• Press OK-this will take you to the "Format Card" menu item next.
5. Formatting the SD Card
• With the SD Card icon (#7) blinking (after pressing OK at the end of
the previous Setup step), press "UP" or "DOWN" to select "FO" (Yes,
Format) or "NO" (Do Not Format) then press "OK" to confirm your
choice.
• Press "UP" or "DOWN" to select "Y" (Yes) or "N" (No), then press "OK" to
confirm. This step provides an extra level of safety, to help prevent
you from accidently formatting a card with files you wanted to keep.
If you select "FO" in the first step, then select "Y" and press "OK",
the camera will format the SD card-all files on the card will be
erased.
Exiting the Setup Menu
Once you have finished using the Setup menu, press "SETUP" to save all
your settings, and exit the Setup menu. You are now ready to take your
Trail Cam outside and begin using it to record wildlife activity.
12
All manuals and user guides at all-guides.com
