Idiomas disponibles
Idiomas disponibles
If you select the "Photo" mode icon (#4) then press "OK":
• The LCD will blink the alternating indicators "1P" (single photo taken
per trigger event) and "3P" (sequence of 3 photos taken per trigger
event). Press "UP" or "DOWN" to select the setting you prefer, then
press "OK" to confirm.
• Next, the LCD will display "LoHI" which sets the resolution for the still
photos. "Lo" represents 2.1MP (the resolution of the sensor) and "HI"
represents is 5.0MP (via software interpolation-the photo quality will
be higher, but each file will use up more space on the SD card). Press
"UP" or "DOWN" to select the resolution you prefer and press "OK" to
confirm.
If you select the "Video" mode icon (#5) then press "OK":
• The movie length is preset at 15 seconds and cannot be changed.
There are no additional settings or options for Video Mode.
After pressing "OK" (when you finish selecting the settings for one/three
photos and resolution if you chose "Photo" Mode), the "Delay Time" icon
(#6) will blink next.
3. Setting the Delay Time
The Delay Time menu item allows you to set the interval that the camera
will sleep before accepting a new PIR trigger, in minutes and seconds. This
setting ranges from 1 second to 10 minutes. The default delay time is 10
S.
• While the Delay Time icon (#6) is blinking, press "OK" to confirm you
want to set it.
• The LCD will display "0010", with first the two digits indicating
minutes and the last two digits indicating seconds.
• While the first two digits are blinking, press "UP" or "DOWN" to change
the minutes value (Range from 00-60 min.). Press "OK" to confirm the
minutes setting.
All manuals and user guides at all-guides.com
CAMERA SETuP (continued)
11
