Idiomas disponibles
Idiomas disponibles
Precautions for Operation
● When someone may touch the air conditioner due to
maintenance, etc., do not allow spray to get onto the sensor
unit or use fl ammable gases near the sensor unit. Also
make sure that the breaker is turned off when performing
maintenance on the air conditioner or sensor unit.
● Do not use sprays or chemicals when cleaning.
Specifi cations
Model No.
Dimensions
Weight
Temperature/Humidity range
Power Source
Part Names
80
No
Item
OPERATION LED
1
(Green)
2
ALARM LED (Red)
3
Switch
4
Gas detector
5
Buzzer
6
WARNING
CZ-CGLSC1
(H) 80 mm × (W) 120 mm × (D) 33 mm
0.1 kg
0 °C to 40 °C / 20 % to 80 % (no condensation)
*Indoor use only.
DC16 V (supplied from indoor unit)
120
1
2
3
5
This is off , on, or blinking depending on the status of the sensor unit.
(Refer to "Self-diagnostics table" (P.11) for details)
It is on while the sensor is monitoring.
This is off , on, or blinking depending on the status of the sensor unit.
(Refer to "Self-diagnostics table" (P.11) for details)
It is off while the sensor is monitoring.
This switch stops the buzzer when it is sounding. If the buzzer was stopped with the switch, the
buzzer sounds again after 1 hour if refrigerant is still detected.
This aperture is used for detecting the refrigerant.
Do not block the aperture or place objects immediately in front of the aperture as this will mean
that refrigerant leaks will not be detected.
This sounds an alarm when a refrigerant leak is detected.
A switch setting can disable the buzzer. (P.8)
33
4
Description
60
10
60
9
6-5×10
(mm)
83.5
