Idiomas disponibles
Idiomas disponibles
GENERAL SAFETY AND USE INSTRUCTIONS
When using power tools, you should take into
account basic safety precautions to avoid the risk
of fire, electric shock and personal injury.
Always
read
maintenance instructions before you start
operating your power tool. Keep the instruction manual
for future reference.
General
It is your responsibility to follow these preventive
measures in order to ensure your own safety. Always
operate the welding machine carefully and responsibly.
In using the appliance, you accept full responsibility for
any accidents caused to third parties or their goods
during its use.
The power tool may only be used by people who have
read the instruction manual and are familiar with its
handling. Before operating the welding machine for the
first time, users should be instructed by the seller or any
other qualified person on how to use it. Users must
ensure they are instructed adequately and practically.
The instruction manual is considered an integral part of
the welding machine and must always be made
available alongside the product.
Familiarize yourself with the control devices and usage
of the power tool. In particular, the user must know how
to quickly stop the appliance.
Stay alert and use common sense while working with a
power tool. A moment of inattention can result in
serious injury.
Do not use the welding machine if you are not both
physically and mentally well. Do not use it while you are
tired or under the influence of medication, drugs or
alcohol. If you have a health problem, ask your doctor if
it is safe for you to use the welding machine before
doing so.
People who use cardiac devices (pacemakers) should
not use this type of power tool or stand next to them
without medical advice.
26
the
safety,
operating
Never allow the welding machine to be used by
children, individuals with limited physical, sensory or
mental abilities, individuals with lack of experience and
knowledge of the welding machine, or others unfamiliar
with the use instructions.
and
The welding machine may only be used as stated
in this instruction manual. Any other use, which
may be dangerous and may cause injury to the user or
damage to the welding machine, is not permitted.
Do not overload the power tool and use the appropriate
tools. The use of the power tool for purposes other than
those intended and the improper use of accessories can
result in hazardous situations.
For safety reasons, any alteration to the welding
machine other than installing accessories specifically
authorized by the manufacturer, is prohibited. The
warranty on your welding machine will be voided if you
alter it in any way.
You may get information on authorized accessories
from your official VITO dealer.
Electrical safety instructions
Do not use power tools in explosive environments,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks that can ignite
liquids, gases, or dust.
Welding equipment can cause power cuts due to high
power consumption. The use of the flux-cored welding
machine in residential areas can cause the breakdown
of other electrical appliances.
During the operation of the flux-cored welding machine
electromagnetic problems may occur in:
▪ Power cords, signal and telecommunication cables,
near the flux-cored welding machine;
▪ TV and radio transmitters and receivers;
▪ Computers and other control units;
▪ Protection devices, for example alarm systems;
▪ Pacemakers and hearing aids;
▪ Calibration or measurement devices;
▪ In equipment with too low ability of interference
resistance;
