bitmore E-PRO POWER QI 10K Manual Del Usuario página 3

CHARGING THE E PRO POWER QI 10K:
Connect the Micro USB end of the provided cable to the Micro USB port on the e-Pro Power
Qi 10K (take care) and connect the USB end to a USB port or mains adaptor (not included) to
charge it. Charging is complete when all LEDs are illuminated.
Note: Charging via the mains is best
USING THE WIRELESS CHARGER:
Click the button to place the mobile phone to be charged on the wireless charging symbol
surface of the mobile power supply, A red light indicates charging your phone
Wired Charging
1. Connect the supplied USB cable (or your own) to the USB port on the e-Pro Power Qi 10K
2. Connect your device to the other end of the cable (take care), charging will
begin automatically
Wireless Charging
1. Press the power button on the end of the e-Pro Power Qi 10K
2. Place your Qi enabled device on the raised charging area, a red LED indicates charging
Note: Do not cover the powerbank or your device during charging, remove any cases. Do not
place metal object on the charging area, keep out of reach of children. Ensure the coil on the
e-Pro Power Qi 10K and your device are correctly aligned.
SAFETY INFORMATION:
Visit bitmore.co.uk for our T&Cs
1. Keep the e-Pro Power 10K away from fire and other sources of heat.
2. Please only use the supplied charging cable and your original certified cabled provided by
your device manufacturer.
3. Do not expose this product to water or liquids. If liquid enters the e-Pro Power 10K or
encounters it, your device, or the charging cable, immediately unplug the product from any
connected power sources or devices. Dispose of the e-Pro Power 10K at your local refuse
centre. Liquid ingress will void the Bitmore guarantee.
BM PM10ECQ E PRO POWER QI 10K 2