LEITZ ERGO COSY Manual De Instrucciones página 3

Height adjustment
CAUTION
When the stool is loaded, do not press the height adjustment buttons or adjust
the stool height. Failure to do so can lead to injuries and damage to the stool.
● To increase the height of the stool, pull the seat ① upwards. The stool
automatically locks into place when released at the desired height. Make sure
the height adjustment is firmly in place.
● To decrease the height of the stool, simultaneously press and hold the two
height adjustment buttons ④. Lower the seat ① and release the two height
adjustment buttons at the desired height. Make sure the height adjustment is
firmly in place.
Product care
NOTICE
Take care of this product. Regular cleaning and maintenance keep the product
working properly and extend its life cycle.
● Regularly check if the screws that fasten the seat ① and the foot ② to the seat
tube ⑤ are firmly tightened. If needed, use a 3mm Allan key to tighten the
screws.
● To clean the chair, wipe with a clean, damp cloth. Do not use wipes or
chemicals as these could damage the seat and height adjustment mechanism.
Warranty
Leitz gives you a 5-year guarantee for defects in materials and manufacturing.
1. Leitz guarantees that if faults arise due to defects in manufacturing and
materials during the guarantee period, it will, at its discretion, repair or, if
necessary, replace the product free of charge. A guarantee for normal wear and
tear is expressly excluded.
2. Leitz guarantee shall lapse in the following cases:
a. If the product has not been installed and used following these
instructions;
b. If the product has been altered or repaired by someone other than Leitz;
c. If a fault arises due to external causes;
d. If the product is used for different uses than intended in this document.
3