DU-HA 99097 Instrucciones De Instalación

PART #99097
Receiver Caddy No-Drill Bracket
Installation Instructions
Tools Required:
// 10mm Socket // 1/2" Socket // 9/16" Socket
Installation Instructions:
Attach No-Drill Mount-A (Item 2) to Receiver Caddy (Item 1) (on
1
desired side) using 10mm socket to secure hex head self drilling screw
(Item 7) and using a 9/16" socket to secure the 3/8" x 1" hex bolt
(Item 5) and flange nut (Item 9).
Attach No-Drill Mount-B (Item 3) to No-Drill Mount-A (Item 2) using
2
a 9/16" socket to secure 3/8" x 1" carriage bolts (Item 6) and flange
nuts (Item 9), leave bolts loose until final placement.
Note: No-Drill Mount-B can be mounted to either side of No-Drill
Mount-A (as shown in Box 4).
Attach Rail Clamp (Item 4) to No-Drill Mount-B (Item 3) using 1/2"
3
socket to secure 5/16" x 2" carriage bolt (Item 8) and flange nut
(Item 10), leave loose until final placement.
Note: The Rail Clamp can be mounted to either side of the No-Drill
Mount-B (as shown in Box 4).
Attach Receiver Caddy to truck bed rail using rail clamp on desired
4
side (as shown in Box 4). Tighten rail clamp to rail then put downward
pressure on top of Receiver Caddy to set rubber feet and tighten all
hardware while applying downward pressure.
Note: The Rail Clamp can be mounted to either side of the No-Drill
Mount-B. Also, No-Drill Mount-B can be mounted to either side of
No-Drill Mount-A. Depending on your truck's side rail this will allow
you to position the Receiver Caddy closer or further away from the
side of your truck bed (as shown below in Box 4).
ITEM QTY DESCRIPTION
1 1 Receiver Caddy
2 1 No-Drill Mount-A
3 1 No-Drill Mount-B
4 2 Rail Clamp
5 1 3/8" x 1" Hex Bolt
6 2 3/8" x 1" Carriage Bolt
7 1 Hex Head Self Drilling Screw
8 1 5/16" x 2" Carriage Bolt
9 3 3/8" Flange Nut
10 1 5/16" Flange Nut
phone: 1.866.306.DUHA (3842) // fax: 1.218.998.4013 // 306 Saint Andrews Street South, Fergus Falls, MN 56537
4
Manufactured by DU-HA, Inc. // www.du-ha.com // www.receivercaddy.com
1
2
3
OR
ENGLISH