Trust PREMIUM-LINE ZCC-3500 Manual De Instrucciones página 5

4. CONNECT DETECTOR
In the App, select a room,
A
press the + button and
choose Zigbee line/Zigbee
On-OFF switch and follow
the instructions. For manual
set up of push-notifications
go to the rules tab, press
the + button and select
notification wizard.twisting it.
5. OPTIONAL: ALSO CONNECT
WITH ZYCT-202 REMOTE
CONTROL
To use the switch with the
ZYCT-202 and the App follow
below steps.
Make sure the ZCC-3500
A
is paired with the App.
(See chapter 4).
Connect the ZYCT-202
B
with the App. (Follow the
instructions in the App to
pair the ZYCT-202).
ZCC-3500 WIRELESS SOCKET SWITCH EN
Connect the ZYCT-202 with
C
the ZCC-3500 by selecting
a channel and holding the
ZYCT-202 against (or as close
as possible to) the switch.
Then press and hold the
D
ZYCT-202 ON button until the
switch switches ON-OFF-ON-
OFF-ON (clicks 5x).
To operate the ZCC-3500
only with the ZYCT-202, follow
steps
C
5. Note: Make sure the switch
is not in connection mode
(LED flashes slowly). Stop the
connection mode by briefly
pressing the button on the
housing. The LED on the switch
stops flashing. After this follow
steps
C
and from chapter
D
and from chapter 5.
D
5