JBM 53645 Manual De Instrucciones página 4

Bomba eléctrica para urea aus32
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
EN
MANUAL OF INSTRUCTIONS
Electric drum pump designed for fuels, water based
media, UREA AUS32 DEF & select chemicals from
metal drums of 205L or 1000-1250L IBC'S.
Compact & lightweight construction.
Convenient ON/OFF Switch with LED Indicator.
Built-in fuse for overload protection and silent mo-
tor.
Stainless Steel filter built into the suction tube inlet
preventing contaminants from getting in and cau-
sing damage.
Built-in 2" bung adaptor fits directly onto metal
drums of 205 L. It can be adjusted 0.6" (15mm) to
adjust to drums with different heights. Includes ad-
ditional bung thread converter for 2" bung threds to
be 2.5"x5mm buttress for using pump with IBC's.
Telescopic suction tube extends from 33-1/2"
(850mm) to 49" (1245mm) for use with 205L drums
or 1000-1250L IBC's.
Supplied complete with 2m (6.6') hose & manual
dispensing nozzle with ¾" (19mm) OD Stainless
Steel Spout
ON/OFF Switch
Pump outlet
with swivel
connection
SPECIFICATION
MOTOR TYPE
TEMPERATURE
MAX. VISCOSITY OF MEDIA
FEATURES
Lift handle
Manual dispensing
nozzle
Thread converter
(with 2.5"x5mm roscas
de contrafuerte)
Telescopic suction
tube
Flexible
corrugated hose
2m (6.6") long
DC Brush Motor (5 pole)
5º to 40ºC (41º a 104ºF)
100 CST
· 4 ·
Duty Cycle: 15 minutes On/15 Minutes Off
Wetted components: Viton, POM, Stainless Steel,
PE, NBR, PP
Recommended use: Diesel, Kerosene, Bio Diesel,
DEF/Urea AUS32, Water based media, Antifreeze,
detergents, Pesticides, Herbicides, Urea, Light oils
with viscosity up to 100 cst.
DO NOT use with: Gasoline, corrosive chemicals,
Lacquer thinners, any material that is not compati-
ble with the pump costruction
Delivers up to 18.4 LPM (4.86GPM).
100V-240V, 50/60Hz, AC Dual Voltage, power
adaptor.
12V DC Battery Cable.
Telescopic suction tube.
SS Strainer
1. Rotate the joint nut anti clockwise
and the pull the strainer end of the
suction tuve away from the bung.
2. After extending the cution tuve ro-
tate the joint nut clockwise to fixe
the suction tube in the extended
position.
REF. 53645
loading