Idiomas disponibles
Idiomas disponibles
SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Double insulation
Warning
Wear ear protection
Wear eye protection
Wear dust mask
EN
OPERATING
INSTRUCTIONS
NOTE: Before using the tool, read the instruction
book carefully.
ASSEMBLY AND ADJUSTMENT
MOUNTING THE PROTECTIVE DEVICES
1. AUXILIARY HANDLE (See Fig. A)
For all work with the machine, the auxiliary handle (1) must
be mounted.
Screw the auxiliary handle (1) on the right or left of the
machine head depending on the working method.
WARNING: Do not make any alterations
to the auxiliary handle.
Do not continue to use an auxiliary handle if it
is damaged.
MOUNTING THE GRINDING TOOLS
Before any work on the machine itself, pull
the mains plug.
Grinding and cutting discs become very hot
while working; do not touch until they have
cooled.
1. SPINDLE LOCKING BUTTON (SEE FIG. B)
Clean the grinder spindle and all parts to be mounted. For
clamping and loosening the grinding tools, lock the grinder
spindle with the Spindle Locking Button (2).
Actuate the Spindle Locking Button (2) only
when the grinder spindle is at a standstill!
2. ASSEMBLING THE PROTECTION GUARD
(SEE FIG. C1-C3)
Align the projection on the guard with the indentation on the
gear box. Put the Wheel Guard for Grinding (4) down firmly.
(See Fig. C1)
Loosen the clamping screw (8), if necessary.
Place the wheel guard with coded projection into the coded
groove on the spindle collar of the machine head and rotate
to the required position (working position). (See Fig. C2)
Tighten clamping screw (8). (See Fig. C3)
NOTE: The closed side of the wheel guard must always
point to the operator.
WARNING! For work with grinding or
cutting discs, the wheel guard must be
mounted.
17
