Indel Webasto Marine isotherm DR49 Instrucciones Para La Instalación Y El Uso página 35

User Manual
1 General considerations
Isotherm marine refrigerators are specifically designed to meet the specific
requirements of the marine environment in terms of performance and reliability.
Isotherm marine refrigerators are designed exclusively for recessed installation.
The units are equipped with a watertight and leak-proof compressor that offers low
power consumption with minimal noise. The refrigerators are easy to install. They
are capable of functioning at angles of up to 30°, or even greater for brief periods of
time.
The following points should be observed in order to ensure maximum performance:
• Frequent opening of the refrigerator door will result in greater power consumption.
• Ensuring adequate ventilation for the compressor and condensing unit will
significantly reduce power consumption.
• The electrical system must be kept in good condition. Inspect the batteries and
check the charge levels regularly. Always use a separate starter battery for the motor.
Respect the indications provided regarding the size of the cables and fuses.
• Keep the inside of the refrigerator clean and dry. Remove the condensation water
from the drip tray beneath the refrigerator's freezer compartment where present.
• If the refrigerator is not expected to be used for a reasonable period of time,
disconnect its power supplies and leave the door ajar in order to ensure adequate
ventilation.
• Check for any visible damage on the refrigerator's mechanical and electrical
components prior to use.
• Clean the inside of the refrigerator with a mild detergent and warm water prior to
use.
35