Idiomas disponibles
Idiomas disponibles
This electric fireplace can be operated by the TOUCH PANEL, located on the front the fireplace, or by the
battery-powered REMOTE CONTROL.
The operation and functions of the two methods are the same.
Before operating, please review the IMPORTANT SAFETY INFORMATION on Pages 2 and 3, and heed all
warnings.
Control Panel
Control Panel & Remote Control Operation
BUTTON
ON (l). Enables all functions.
ON
OFF (O). Turns off all functions on control panel
and remote control.
OFF
ON: Enables control panel functions and
remote control. Turns on flame effect.
OFF: Disables control panel functions and
remote control. Turns off flame effect.
POWER
TIMER button: Controls timer settings to turn
off fireplace at selected time.
Settings range from 0.5 hours to 7.5 hours.
TIMER
FLAME button: Makes flame effect dimmer
and brighter.
NOTE: Flame effect stays on until power button
is turned off. Flame effect must be on for heater
FLAME
to turn on.
COLOR button: Makes the color flame effect
changing.
NOTE: color effect stays on until power button
is turned off. Color flame effect must be on for
COLOR
heater to turn on.
FUNCTION
14
Remote control
ACTION & INDICATION
1. Press ON (l). Power turns on. All functions
are enabled.
2. Press OFF (O). Power, flame effect, and all
functions turn off.
1. Press once. Indicator light turns on. Power
turns on. All functions enabled.
2. Press again. Flame effect turns off. Unit goes
to standby. All functions turn off.
1. Press once. Indicator light turns on. Timer is
set to 0.5 hours.
2. Press again until desired setting is reached.
Indicator lights show setting.
1. Press once. Flame brightness effect gets
changing.
2. Press again. until desired setting is reached.
1.Press once. Flame color effect gets changing.
2.Press again until desired setting is
reached.total 3 colors.
