Idiomas disponibles
Idiomas disponibles
the screws, refer to Figure 1.
D.Mark out location, then mount the bracket(s) onto the wall using the supplied screws. This bracket MUST have
the slots facing upward and be level.
NOTE: It is strongly recommended that the mounting bracket (E) be Screwed into the wall studs Where
possible. If the wall Studs cannot be used, ensure
That the supplied plastic anchors are used to affix the bracket to the wall and the bracket is adequately
secured.
E. With the wall mounting bracket installed have two people lift the appliance up and insert the hooks on the back
of the appliance into the slots on the bracket and lock back the two screws on both sides
F. Check the appliance for stability ensuring that the bracket will not pull free from the wall.
5. Operation
Read and understand this entire owner's manual, including all safety information, before
plugging in or using this product. Failure to do so could result in electric shock, fire, serious
injury, or death.
Power
Plug the power cord into a 220~240 Volt (see IMPORTANT SAFETY INFORMATION on Pages 2 and 3). Make
sure the outlet is in good condition and that the plug is not loose. NEVER exceed the maximum amperage for the
circuit. DO NOT plug other appliances into the same circuit.
Methods of Operation
13
