filters to fully dry before putting back into the machine).
•
Clean the pre-motor filter every time the dirt container is emptied
and replace the filters every 12 months.
•
If the vacuum cleaner is blocked, switch off and unplug before
removing the blockage.
ASSEMBLING YOUR MACHINE
IMPORTANT: The base of the vacuum cleaner should always
be positioned flat on the floor when starting and in use. The
dirt container should be locked into place before lifting the
vacuum cleaner by the carry handle.
1. Press both buttons at the end of the hose and push hose into the
hose entry point.
2. Insert the hose grip into the telescopic extension tube.
3. Press the button on the telescopic extension tube and adjust to
required length.
4. Insert the other end of the telescopic extension tube into the
floorhead.
5. Fully unwind the power cord. A yellow mark on the cord indicates
the recommended cord length. Do not exceed the cord beyond the
yellow mark.
6. Plug into mains and press the On/Off button to switch the machine
on.
CAUTION: When unwinding the power cord always pull out to
the yellow marker but not further.
