IRIS TSTM-01 Manual De Instrucciones página 5

Idiomas disponibles

Idiomas disponibles

HOW TO USE
Using the Steamer
1. Place the main body on the base.
When the product is not in use or when storing the product,
please put the main body on the base .
Do not place on unstable surfaces or on surfaces with low heat
resistance (such as carpets, plastic, wood, etc .)
2. Insert the power plug securely into the electric socket.
3. Turn the power switch to ON.
Product will begin preheating and the power indicator light will
blink red for about 35 seconds .
The power indicator light turns from blinking to solid when ready
to use .
If ironing and not steaming, please wait 20 seconds after the
power indicator light turns on to start ironing .
Power indicator
(blinking)
Power indicator
(solid)
7
4. Press the steam button to start steaming.
Steam is emitted only when the steam button is pressed .
Even when the power indicator light is on, it may take a few moments
for steam to start emitting .
If running continuously, steamer can run for up to 5 minutes and 30
seconds . Steaming duration depends on actual usage .
Refer to the Fabric Guide (P6) for correct steam level to use on
clothing fabric .
Product can also be used as a regular iron by not pressing the steam
button .
5. Stop steaming.
Release the steam button and wait for steam to stop .
Turn the power switch to OFF and place the main body back in the
base .
6. Unplug the power plug from the electric socket and wait
for the main body to cool down completely.
7. Empty the water tank.
Remove the water tank cap to empty the water in the water tank .
8. Reinstall the water tank.
Make sure the water tank cap snaps firmly into place before
reinstalling the water tank .
Water droplets may still remain in the water tank . This is not an
issue .
Please store the product on a level, stable surface .
When stored in and enclosed space such as a closet, make sure the main body has completely cooled
down before storing .
CAUTION
Do not wrap the cord around the product .
Doing so may damage the power cord, which can lead to fires .
Steam button
8
loading