1. Insert the end of the hose into the unit. Ensure the hose has
clicked into place.
2. Insert the handle into the telescopic extension tube.
3. Press the button on the telescopic extension tube and adjust to the
required length.
4. Insert the other end of the telescopic tube into the floorhead until it
clicks into place.
HOW TO USE
IMPORTANT: The motor is equipped with a thermal cut-out. If
for any reason the unit should overheat, the thermostat will
automatically turn off.
5. Fully unwind the power cord. A yellow mark on the cord indicates
the recommended cord length. Do not exceed the cord beyond the
yellow mark.
6. Plug in and switch the unit on by pressing the power button.
7. Use the vacuum by moving the floorhead backwards and forward
for an effective clean.
8. Remove the floorhead to use in harder to reach places.
USING YOUR ACCESSORIES
9. Choose an accessory
10. Push the accessory onto the telescopic extension tube or hose.
