Technical Details - BonsenKitchen CM8902 Instrucciones De Operación

TECHNICAL DETAILS

220-240V~ 50-60Hz 1250-1450W
BEFORE USING COFFEE MAKER
To ensure the first cup of coffee tastes excellent, you should rinse the coffee
maker with warm water as follows:
1. Pour water into the water tank, the water level should not exceed the "MAX"
mark in the tank. Then close the water tank cover.
NOTE:
The appliance is supplied with a detachable tank for
easy cleaning, you can fill the tank with water firstly, and then
put the tank into the appliance.
2.
Set steel mesh into the metal funnel (no coffee in steel mesh).
3.
Place an espresso cup (your cup) on drip plate. Make sure the coffee/steam




knob is on the "
NOTE:
The appliance is not equipped with a jug, please use
your jug or coffee cup.
4.
Connect to power source, press the ON/OFF switch. The red indicator will be




illuminated.
5.
The appliance begins to be pre-heated until the white indicator is illuminated,




it shows the pre-heating is finished. Turning the coffee/steam knob to the
" " position, and water will flow out.
6.
After about 30s, turn the coffee/steam knob to the "
brewing, you can pour the water in a container out then clean them thoroughly,
now you can start brewing.
NOTE:
There may be noise when pumping the water for the
first time, it is normal, the appliance is releasing the air in the
appliance. After about 20s, the noise will disappear.
" position.
17
" position to stop