steelplay JVAMUL00097 Manual De Instrucciones página 8

7.Your controller is now ready to use.
Switch Pro mode (the LED indicator is purple)
To make sure the system can identify the adapter easily, please turn on the "Pro Control-
ler Wired Communication" of the Nintendo Switch system once you switch the adapter
TM
to the Switch Rumble mode (the LED indicator is purple). Tips: System Settings - Control-
lers and Sensors - Pro Controller Wired Communication – ON.
Wired Controllers Set UP
1. Firstly connect the Nintendo Switch system to a TV. Just turn on your PC if you use
TM
the adapter on your PC system.
2. Connect the adapter into any spare USB port on your Nintendo Switch or PC
TM
system.
3. Connect the wired controllers to the adapter.
Note: The wireless controller that comes with your console will become a wired control-
ler by simply connecting a standard USB cable (with exception of Xbox 360 which
requires an official wired Xbox 360 controller).
TM
For best results, it is recommended that you use genuine Xbox or PlayStation controllers
TM
and quality certified USB cables.
4. Your controller is now ready to use.
Update the Software
If you are having problems with the adapter, you can follow the below instructions to
update the software.
1. Download the software from http://www.steel-play.com and install it
on your Windows system.
2. Double click on the updater and leave the updater window open on your screen.
3. Connect the USB from your adapter into any spare USB port on your PC.
4.Please make sure your adapter is in the Nintendo Switch or PS3 /Dinput mode (The
TM
LED indicator is in Red or Blue). If not, please switch the adapter to the Nintendo Switch
or PS3 /Dinput mode by pressing and holding the button located at the side of the
TM
adapter for 3-5 seconds.
5. As soon as the adapter has been recognized (LED indicator turns off), select "Up-
date".
6. Do not disconnect the device until you are informed that the updated was completed
successfully.
Note:
1. Only one Bluetooth controller is supported for one adapter.
2. A wired USB controller and a wireless Bluetooth controller can be connected at the
same time, but both of them have the same functions and can only play one game
character.
3. To switch A-B, B-A, X-Y, Y-X, press and hold the button "START" and "A" for 3 seconds.
To switch A-A, B-B, X-X, Y-Y, press and hold the button "START" and "B" for 3 seconds.
This works only when you connect your Switch Pro, Switch Joy-Con and Wii U Pro
controllers to a PC Xinput system.
4. The A-B X-Y can be switched once you connect your Xbox 360 or Xbox One/S
controller to the Switch system.
To switch A=B B=A X=Y Y=X, press the button «START» and «B» for 3 seconds; to switch
A=A B=B X=X Y=Y, press the button «START» and «A» for 3 seconds.