Idiomas disponibles
Idiomas disponibles
LED Indicator in Red: Nintendo Switch
LED Indicator blinks slowly: The Bluetooth is not connected yet LED Indicator blinks qui-
ckly: The Bluetooth is syncing
LED Indicator lights up: The Bluetooth has been paired
LED Indicator in Green: PC Xinput System mode
LED Indicator blinks slowly: The Bluetooth is not connected yet LED Indicator blinks qui-
ckly: The Bluetooth is syncing
LED Indicator lights up: The Bluetooth has been paired
LED Indicator in Purple: Switch Rumble mode (with controller vibrations)
LED Indicator blinks slowly: The Bluetooth is not connected yet LED Indicator blinks qui-
ckly: The Bluetooth is syncing
LED Indicator lights up: The Bluetooth has been paired
Note:
The Bluetooth is not connected yet if LED Indicators blink slowly (around 2 times/second).
4. Button on the side of the adapter:
Used for the modes switch and Bluetooth pairing.
- Press the button shortly to SYNC the controllers and the adapter. The indicator blinks
quickly.
- To switch the modes, press and hold the button on the side of the adapter for 3-5
seconds.
- The LED indicator blinks slowly in blue for the PS3
Nintendo Switch mode is red, the PC Xinput mode is green, and the Switch Pro mode
is purple.
Bluetooth Controllers Set Up
1. Firstly connect the Nintendo Switch
the adapter on your PC system.
2. Connect the adapter into any spare USB port on your Nintendo Switch
system.
3. To switch the modes, press and hold the button on the side of the adapter for 3-5
seconds. The LED indicator blinks slowly in blue for the PS3
the Nintendo Switch mode is red and the PC Xinput mode is green.
4. Turn on the Bluetooth controllers
5. To sync the Bluetooth controller and the adapter, press the Button on the side of the
adapter, and then press the SYNC button on your Bluetooth controller. The LED indicator
blinks quickly.
Note:
If the Bluetooth syncing failed, please connect the Bluetooth controller to the adapter
using a USB cable (not included in the packaging, you can purchase it separately). As
soon as the controller is identified by the system, you can disconnect the USB cable and
start to SYNC it again.
6. The Bluetooth has been paired if the LED indicator lights up.
System mode (without controller vibrations)
TM
or PC Dinput system mode, the
TM
system to a TV. Just turn on your PC if you use
TM
or PC Dinput system mode,
TM
or PC
TM
