Français; Ponçeuse A Bande Af11 - Virutex AF11 Manual De Instrucciones

4491007 Belt 690x100 grain size 50
4491008 Belt 690x100 grain size 60
4491009 Belt 690x100 grain size 80
4491010 Belt 690x100 grain size 100
7. CHANGE OF VOLTAGE
Disconnect the machine from the mains
before performing this operation.
The machines leave the factory connected to operate at
the voltage indicated on the label stuck to the supply
cable. The working voltage may be changed by following
the plan in (Fig. 5).
Whenever you change the working voltage, check that
the belt turns in the direction indicated by arrow B (Fig.
1). If not, invert the order of the cables in the plug for
connection to the mains.
8. NOISE AND VIBRATION LEVEL
The noise and vibration levels of this device have been
measured in accordance with European standard EN
60745-2-4 and EN 60745-1 and serve as a basis for
comparison with other machines with similar applications.
The indicated vibration level has been determined for
the device's main applications and may be used as
an initial value for evaluating the risk presented by
exposure to vibrations. However, vibrations may reach
levels that are quite different from the declared value
under other application conditions, with other tools or
with insufficient maintenance of the electrical device
or its accessories, reaching a much higher value as a
result of the work cycle or the manner in which the
electrical device is used.
Therefore, it is necessary to establish safety measures
to protect the user from the effects of vibrations,
such as maintaining both the device and its tools in
perfect condition and organising the duration of work
cycles (such as operating times when the machine is
subjected to loads, and operating times when working
with no-load, in effect, not in use, as reducing the
latter may have a considerable effect upon the overall
exposure value).
9. WARRANTY
All VIRUTEX power tools are guaranteed for 12 months
from the date of purchase, excluding any damage which
is a result of incorrect use or of natural wear and tear
on the machine. All repairs should be carried out by the
official VIRUTEX technical assistance service.
10. RECYCLING ELECTRICAL EQUIPMENT
Never dispose of electrical equipment with domestic was-
6
te. Recycle equipment, accessories and packaging in ways
that minimise any adverse effect on the environment.
Comply with the current regulations in your country.
Applicable in the European Union and in European
countries with selective waste collection systems:
If this symbol appears on the product or in the accom-
panying information, at the end of the product's useful
life it must not be disposed of with other domestic waste.
In accordance with European Directive 2002/96/EC, users
may contact the establishment where they purchased the
product or the relevant local authority to find out where
and how they can take the product for environmentally
friendly and safe recycling.
VIRUTEX reserves the right to modify its products
without prior notice.
F R A N Ç A I S
PONCEUSE A BANDE AF11
Remarque importante
1. INSTRUCTIONS DE SÉCURITÉ POUR
LE MANIEMENT DE LA PONCEUSE
Lire attentivement la BROCHURE
D'INSTRUCTIONS GÉNÉRALES DE SÉ-
CURITÉ jointe à la documentation de
la machine.
• Avant de brancher la machine, vérifier si la tension
d'alimentation correspond à celle indiquée sur l'étiquette
collée sur le câble d'alimentation.
• Vérifier en mettant en marche la ponceuse que le
sens de rotation de la bande est bien celui indiqué
par la flèche B (Fig. 1), s'il n'en est pas ainsi, il faudra
inverser l'ordre des câbles de connexion de la prise
d'alimentation de secteur.
• Prendre soin de ne pas mettre les mains sur la zone
de ponçage, et de toujours prendre la machine par la
poignée.
• Utiliser uniquement des pièces detaches d'origine
VIRUTEX.
• La poussière produite pendant le ponçage peut être
toxique ou nocive pour la santé (par exemple: celle des