Idiomas disponibles
Idiomas disponibles
EN
Before checking, please close the general input tap or leave the valve in bypass position.
The use of detergents or chemical products that could damage the equipment is
prohibited.
Wipe off the dust on the surface of the equipment with a damp cloth, and prevent water
from reaching the electronic components and causing damage to the valve. Disassembly.
(Before disassembly, the device must be in the recommended cycle according to the
maintenance operation to be carried out.)
Top cover removal
Press the band inwards and
the base of the cover outwards,
performing the same operation on
the front.
Pull up the cover and separate it
from the back.
Remove the items inside the cabinet, to make room
74
|
CERAMIC PILOT
12. MAINTENANCE
Remove the by-pass clips, remove
the by-pass backwards, unscrew
the hex nut, remove the brine
tube (with) the connector, remove
the flow controller from the drain,
loosen the clamp and pull out the
Internal emptying
for the tank.
By-pass disassembly
drain pipe.
Use a special handle and screw it to the neck of the
bottle to pull it up. Then remove the resin tank.
Valve removal
Take the valve wrench and
unscrew the valve from the brine
tank collar.
Resin tank disassembly
