Idiomas disponibles
Idiomas disponibles
STARTING AND STOPPING
WARNING!
This lawnmower is sold without fuel and oil.
Ensure machine is oiled and fuelled before starting the engine
Do not overfill
Never fill a fuel tank in a confined area, indoors or when the
engine is running.
Allow to cool for at least two minutes before refuelling
A- Starting a cold engine
1.
The throttle control, located on the right-hand side of the upper handle, is used to regulate the engine
speed. Move the throttle on « STARTER MAX » position
2.
Press 3 times in hot weather or 5/6 times a very cold time the red primer on the front left side of the air
.
filter
3.
Attach the spark plug ensuring the metal cap is fastened securely to the metal tip on the spark plug.
4.
The flywheel brake lever / operator's presence control / OPC handle is located in the upper handle of the
lawnmower. The handle must be depressed to allow the ignition and held against the upper handle.
5.
The recoil starter handle is attached to the upper handle on the right-hand side. When starting,
always stand behind the lawnmower in the operating position. Pull the recoil starter handle until the
engine runs.
6.
Once started, allow 2 / 3 minutes for the engine to warm up before mowing.
Move the throttle on «MIN» position.
Depress the OPC handle to allow the ignition and held against the upper
handle. Pull the recoil starter handle until the engine runs.
B- Starting a warmed-up engine
The blade
starts to
rotate
after the
engine is
switched
on.
