Idiomas disponibles
Idiomas disponibles
IMPORTANT
fuelled as detailed in this manual before
–
NOTE
machine (operating position)
D- Assembly of the handle
•
Nip together the lower handle against the mounting bracket (using pliers).
•
Connect the lower handle, right bracket and left bracket with two knob nuts and two square neck bolts.
•
Lift the upper handle and align it with the lower handle. Tighten knob nuts or the quick lock handle to
the upper handle.
•
Raise the complete handlebar whilst depressing both levers to release the starter handle, taking
care not to crease the control cables at the pivot point.
•
Attach the control cables to the handle with cable ties and attach the recoil starter to the rope guide on
the upper handle
Adjustable handle
For a more ergonomic use, the upper handle can be adjusted in height.
•
Loosen the locking knobs located between the lower handle and upper handle, by pulling them
outwards. The jaws fixing the 2 parts of handle will now open.
•
Adjust now the upper handle, moving up and down, to obtain the ideal position of handle.
•
Once the ideal height position is reached, tighten the handle knobs by folding them against the handle.
–
This lawnmower is shipped without fuel and oil. Ensure machine is oiled and
Reference to right hand or left-hand side of the mower is observed from the rear of the
starting the engine.
