Idiomas disponibles
Idiomas disponibles
4.Timer
Press the timer button to set the on/off time.
5.Setting the temperature
CLEANING AND MAINTENANCE
ALWAYS turn the unit OFF and unplug the power cord
from the outlet before cleaning, servicing or moving the
heater. Failure to do so may result in electric shock, fire
or personal injury.
To set the heater timer function, press the timer button on the
control panel or remote control when the heater is off. The
heater will then go into standby mode and the start time can
then be set. To set the end time, press the timer button again
while the heater is in standby mode and it will automatically turn
off at the set time. The timer function increases by one hour each
time the timer button is pressed up to a maximum of 24 hours.
Press the "UP" button on the remote control or control panel to
increase the temperature (temperature range is 15-30℃).
Press the "DOWN" button on the remote control or control panel
to lower the temperature (the temperature range is 15-30℃).
30
