Idiomas disponibles
Idiomas disponibles
buttons to set the day, hour and minutes. The user can set it
independently. When the unit is turned on, if the ON time is set earlier
than the OFF time, the unit will not turn on at the set time. If the off
time is set earlier than the on time, the unit will turn on and off at the
on time.
PARTS AND ACCESSORIES
- Electric fireplace
- Remote control
- Wall bracket
- Feet x 2
- Screw 4*18mm x 8 (To fix the feet to the heater)
- Screw 4*45mm x 3 (To fix the wall bracket)
- Dowels x 3 (To fix the wall bracket)
- Screws 4*12mm x 2 (To fix the heater to the wall bracket)
WALL INSTALLATION
Important :
- Always make sure that the unit is unplugged from the power supply before
beginning installation. Never move or clean the heater while it is plugged in.
- Check the wall to make sure there are no wires, pipes, etc. when drilling
holes in this area.
- The heater cannot be fixed to a cavity wall. It must be fixed to a solid wall.
Step 1 : Choose a location with a minimum clearance of 0.5m on each side and
1m high.
Choose a location near an electrical outlet so that an extension cord is not
required.
DO NOT place the unit directly under an electrical outlet.
26
