iBACheck AA1698 Manual De Instrucciones página 8

English
LOW
Safety
Level
Alert
Level
Time Setting
(1) Press ESC【
Time Clock mode for time reading, at the same time, the【DAC】
indicator will would disappear.
(2) In【 RTC 】mode, press and hold SET【
2 seconds and the device would enter time setting mode. The selected
digits for adjusting will flash. (SET【
down, START【 】is to confirm).
(3) Press SET 【
SET【
(4) Press START【
】for the second time and press SET【
【
hour format.
(5) Press START【
Caution
(1) To achieve an accurate reading, user should ensure there is no
alcohol residue inside the chamber before starting a new alcohol test.
(2) After any 4 consecutive tests, please allow the device to rest for 2
minutes.
(3) When the product is unused, please store it in a dry environment.
(4) When low battery indicator flashes, the reading is invalid, please
recharge the battery immediately.
For measurements between 0~0.08
(0~0.008%BAC
false alarm due to environment and mouth smell
For measurements between Low Level and Alert
Level, the alcohol concentration level shows on the
display with white backlight.
For measurements equal to or above the alert
concentration level, the analyzer beeps together
red backlight flashes for 10 times
】key would change the【DAC】mode into Real
ESC
】 & ESC【
】to add number and press ESC【
】once to shift the selected digit and press START
】for two seconds to exit the time setting mode
or 0~0.04mgl).
】is + up; ESC【
ESC 】 to alter the selected digits. Press
4
‰BAC
It will show 0 and avoid
】& ESC 【
】to minus number.
ESC
】key to select 12/24
】key for
ESC
】 is
ESC