iBACheck AA1698 Manual De Instrucciones página 7

English
(4)
Please blow in within the
long beep will be heard and please keep blowing. When the beep tone
stops, sampling finishes and the test result reading will be shown on the
display immediately.
If there is no alcohol detected within
take about 5 seconds sampling and show the reading.
(5) Unit set mode：
User can press SET【
seconds and enter unit set mode 【 Unit 】 will be shown on the 4-8
segment, the selected unit will flash. Press START【
four different units.
mg/l %BAC
（0.10mg/l ≈ 0.020%BAC = 20mg/mL = 0.20‰BAC）
When exit this unit set mode, the selected unit will be preset as default
unit. If power reset, the unit setting will also be reset.
(6) Press & hold SET 【
mode, "MEMORY" display together with record number. The last record
will display on the screen.
(7) Press SET【
record is 9, then the sequence is as following.
MEMORY
(8) Power off:
①. Auto off, the machine will turn off automatically if no key being press
for 25 seconds.
②. Press ESC【
START Key for 2 second to turn off the machine.
Alert Signals
i1 alcohol tester is designed to alert user as following:
5s auto detect
】& START【 】keys at the same time for 2
mg/100mL
】 key 2 seconds can go to memory recall
】key to scroll backward the memories, if the last
MEMORY
8
......
】key to enter Time Clock Mode. Press & hold
ESC
period. If alcohol is detected, a
5s auto detect
‰BAC
MEMORY
......
3
period, it will also
】Key will scroll
MEMORY
......