Idiomas disponibles
Idiomas disponibles
ENGLISH
1.2 GUARANTEE
The guarantee is valid for a year, against all defects of material, from the date of delivery of the equipment.
On delivery, check that the equipment has not been damaged during transport and that the accessories are integral and complete.
POSSIBLE CLAIMS MUST BE PRESENTED IN WRITING WITHIN EIGHT DAYS OF RECEIPT.
The purchaser will enforce his rights on the guarantee only when he has respected the conditions concerning the benefi t of the gua-
rantee, set out in the supply contract.
1.2.1 EXPIRY OF GUARANTEE
Besides what has already been set out in the supply contract, the guarantee expires:
- If the limits set out in the technical data table are overshot.
- If the instructions set out in this booklet have not been carefully followed.
- If the equipment is used badly, defective maintenance or other errors by the client.
- If modifi cations have been carried out without written authorization of the manufacturer and if non original spare parts have been used.
1.3 IDENTIFICATION
Each individual machine has an identifi cation plate
ting the following details:
1) Mark and address of the Manufacturer;
2) Designation of the machine;
3) Type and model of the machine;
4) Unloaded mass, in Kilograms;
5) Mass full load, in Kilograms;
6) Serial number of the machine;
7) Year of manufacture;
8) Place of manufacture;
You are advised to note down your data on the form below, along
with the date of purchase (9) and the dealer's name (10).
9)
____________________
10)
____________________
This information must always be quoted whenever assistance or
spare parts are needed.
ATTENTION
Do not remove, tamper with or make the CE mark affi xed on
the machine illegible.
Refer to the information provided on the CE mark for the
manufacturer's contact details (e.g. for requesting spare
parts, etc.).
When the machine is demolished, destroy the CE marking.
42 - EN
USE AND MAINTENANCE
(Fig.1)
indica-
2.0 GENERAL SAFETY RULES
2.1 DANGER AND INDICATOR SIGNALS
The signs described are reproduced on the machine (Fig.2). Keep
them clean and replace them if they should come off or become
illegible. Carefully read each description and learn their meanings
by heart.
2.1.1 WARNING SIGNALS
1) Before operating, carefully read the instruction booklet.
2) Before carrying out maintenance, stop the machine and consult
the instruction booklet.
2.1.2 DANGER SIGNALS
4) Danger. Sharp objects could be thrown up. Keep a safe distance
from the machine.
5) Danger. Risk of injury to the legs.
Keep a safe distance from the machine.
6) Danger of injury to the hands. Never remove the guards while
(1)
(2)
(3)
(4)
(5)
(6)
(7)
cod. F07011998
(8)
Fig.1
