- To clean the appliance, refer to the MAINTENANCE section.
- Before using the appliance for the first time, wash the parts in contact with
food as indicated in the MAINTENANCE section.
- This device is designed to be used at a maximum altitude of 2000m
above sea level.
- The appliance must not be operated by means of an external timer or with
a separate remote control system.
- This appliance is not intended for professional use.
Keep the warranty, the receipt and the instruction booklet for any further consultation.
After removing the packaging, make sure that the appliance is intact and in case of visible damage, do not use
it and contact professionally qualified personnel.
Do not leave parts of the packaging within the reach of children to avoid the danger of suffocation.
Before connecting the appliance, make sure that the voltage in the socket corresponds to the details indicated
on the plate.
If the plug and socket are not compatible, have the socket replaced with a suitable type by professionally
qualified personnel.
Do not use adapters or extensions that do not comply with the current safety regulations or that exceed the limits
of the current carrying capacity.
Do not pull on the power cable or the appliance itself to take the plug out of the socket.
The use of any electrical appliance requires the observance of certain fundamental rules, in particular:
- Do not touch the appliance with wet or damp hands.
- Do not leave the appliance exposed to atmospheric agents (rain, sun).
- Do not subject it to impacts.
If there is a fault or abnormal operation of the appliance, immediately
disconnect the plug, do not tamper with it and contact an authorised Service Centre.
If you decide to no longer use this type of appliance, it is advisable to make it inoperative by cutting the power
cable, obviously after disconnecting it from the power socket.
To avoid dangerous overheating, it is advisable to unwind the power cable along its entire length.
For safety reasons, the appliance cannot be disassembled.
Do not use the appliance outdoors.
Do not process hard food such as ice or meat with bones as they could damage the appliance, break the blades
and cause injury.
To keep the blade seal efficient, do not run the appliance empty.
The appliance is equipped with a safety device that stops operation in the event of abnormal overheating.
Should this device intervene, it is necessary to disconnect the appliance from the power supply and let it cool
for at least 15 minutes.
WARNING: Do not use this appliance near bathtubs, showers, sinks or other vessels that contain water.
Use only the accessories supplied with the appliance.
Keep the appliance and its cable away from heat sources.
To blend food in a saucepan, remove the saucepan from the stove and allow the contents to cool below 70°C
before inserting the stem and blending; do not leave the stem in the pan.
To avoid splashes, immerse the blades completely in the food to be blended.
Hard ingredients such as legumes, soybeans etc. they must be soaked in water before processing.
TECHNICAL INFORMATION
(see the image on page 2)
1 - Speed button
2 - TURBO button
3 - Motor body
4 - Stem
5 - Stem blades
6 - Speed adjustment knob
7 - Whippers
8 - Chopper container
9 - Chopper blades
10 - Chopper lid
11 - Bowl
Technical data: see the label on the appliance.
5