Idiomas disponibles
Idiomas disponibles
6.8 Capacitance (CAP)
Range
Resolution
10nF
0.001nF
100nF
0.01nF
1uF
0.001uF
10uF
0.01uF
100uF
0.1uF
1mF
1uF
10mF
10uF
60mF
100uF
Overload protection: 250VDC or AC RMS
Note: For Capacitance <1ᶙF, it is recommended to use the "REL" function to ensure measurement
accuracy.
6.9 SQUARE WAVE OUTPUT
Range
Output frequency: 2kHz Vp-p˃3V
7. OPERATION INSTRUCTION
Voltage Measurement
• Set the rotary switch to the voltage position, based on the demands to the desired range.
• According voltage measurement requirements, select the DC or AC function.
• Insert the black test lead into COM jack, red test lead into V/ jack.
• Touch the black test probe tip to the negative side of the circuit; touch the red test probe tip
to the positive side of circuit.
• Read the value of voltage in the LCD display.
Note:
• Equipped with automatic identification ACV/DCV function. Put the rotary switch to
position for measurement.
• In small range testing, even without input or connection of test leads, the meter may display
the value, that is normal and not affect the accuracy of the measurement.
• To avoid electrical shock and/or damage to the instrument, do not attempt to take any voltage
measurement that might exceed 1000VDC or 750VAC RMS.
Accuracy
±(4%+25d)
±(4%+15d)
±(5%+25d)
Description
36
