Basic Operation - KlipXtreme Titan KBS-200 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Components
Carrying string for easy transport.
1. Lanyard
Hold the button to power on or off. Press the button
2. Power/mode button
to select mode. Press it twice to enter TWS pairing
mode.
3. LED function indicator
Bluetooth
Successful pairing: White LED blinks slowly.
Aux. cable connected: White LED stays on.
Mute: White LED blinks slowly.
Microphone LED indicator.
4. Microphone
Briefly press this button to play or pause audio.
5. Play/pause, answer call/end
Briefly press this button to answer an incoming call or
call/Bluetooth
multifunction button
®
end the call.
Hold the button briefly to disconnect the Bluetooth
connection.
Press and hold this button to reject a call.
Press this button twice to call back the last number
dialed on your phone.
Note: Audio will stop and resume automatically once
the call is ended.
To adjust the volume level, briefly press the - button.
6. Volume down -/previous track
Press and hold the - button to play the previous track.
button
To adjust the volume level, briefly press the + button.
7. Volume up +/next track button
Press and hold the + button to play the next track.
Description
mode: White LED blinks fast.
®
8. Aux. in cable connection interface
9. Battery LED charge indicator
10. Micro USB charging port
III. Basic operation
A. Charging the speaker
• Plug one end of the supplied Micro USB cable into the speaker's Micro USB port
and the other end to the USB port of a 5V USB adapter to charge the battery.
®
• The battery takes around 3.5 hours to fully charge.
• Make sure that the speaker is fully charged before using it for the first time.
• While the speaker is being charged, the charging LED glows red.
• The charging LED turns off once the speaker is fully charged.
Note: If the speaker is completely discharged or has not been charged for a while, it
is recommended to charge it for at least 10 minutes prior to powering on the
speaker.
Use this input to connect any external audio device
fitted with a 3.5mm stereo output
This LED indicates the charging status of the speaker
Use this Micro USB connector to connect to an
external 5V power source
Tabla de contenido
loading

Tabla de contenido