Roborock Dyad Pro Manual Del Usuario página 17

Routine Maintenance
2. Take out the filter from dirty water tank cover and remove any
trash attached to the filter. If the filter is dirty, rinse it with cold
water and then shake off the residual water.
3. Allow up to 24 hours for all parts drying and install them back
in place.
Notes:
• Use a second filter if necessary.
• Do not touch the filter with your hands, brushes, or sharp objects to avoid damage to the
filter.
Cleaning the Rollers
1. Remove the vacuum cleaner from the charging dock, switch it
off.
2. Place the vacuum on a hard and flat floor and lock the cleaning
head.
3. Rotate the rear roller cover to the unlock position, and pull the
rear roller outward.
4. Pinch the left and right front rollers with both hands, and pull
them outward.
016