1.- Put the motor body (9) on a flat, hard and level surface.
2.- Plug the machine into an outlet compatible with the appliance.
3.- Prepare the food you are going to process.
4.- Put the main shaft (8) onto the motor assembly clutch (12).
5.- Put the pitcher (7) onto the motor body with the handle facing forward. Turn the pitcher
counter-clockwise until the pitcher is locked in place.
WARNING
: For your safety, the appliance will not run if the pitcher is not properly installed.
6.- Follow the instructions below for whatever accessory you are going to be using.
OPERATION
Fine grating disk (15) or coarse grater/slicer disk (17)
Use these accessories for grating food or cutting food into
slices.
a.- Install the fine grating disk or the coarse grater/slicer disk
on the pitcher and make sure it engages with the main
shaft.
The coarse grater/slicer can be installed in 2 positions.
One of them will cut food into slices, but if it is put in the
other way the food will be grated.
WARNING:
Be very careful when handling the
disks, because they are extremely sharp. Cut protection
gloves should be worn when handling the disks.
b.- Put the lid on the pitcher (6) and turn it counter-clockwise
until the lid is locked.
WARNING:
For your safety, the appliance will not
run if the lid is not properly installed and locked.
c.- Put the food into the food feeder tube (5) and use the
pusher (4) to push the food towards the blades.
WARNING:
Do not put your hands or any other
utensils into the feeder tube because it could be
extremely dangerous.
Juicer (18)
Use this accessory for squeezing juice from lemons, limes
or oranges.
a.- Install the juicer on the pitcher and make sure it engages
with the main shaft.
Turn the juicer counter-clockwise to lock it in place.
WARNING:
For your safety, the appliance will not
run if the juicer is not properly installed.
b.- Position the cut fruit over the middle of the juicer. After
the motor starts running gently push downwards to
squeeze juice from the food. The juice will be kept in the
pitcher.
43