Idiomas disponibles
Idiomas disponibles
UK
13. By some types of roller skates where the chassis is fastened with a central screw, it is possible to adjust the position of the chassis according to the individual feeling of the skater by loosening this screw.
14. Aluminum chassis are generally more noisy then PP chassis. The noise is proportional to the time of use of the roller skates (wearing out of the bearings and wheels) and it is not a reason for a claim.
15. It is not a defect if the wheels are not touched down on new unloaded roller skates.
16. By adjustable roller skates, we adjust the size with a pushing the safety lock on the side in the back part of the roller skates to the front (enlargement) or to the back (reduction).
17. Remove all sharp edges which can occur when using the roller skates immediately. You will protect yourself and other people as well.
18. Before every skating, check the tightness of all bolts, axles and nuts incl. their correct seating !!! If bolts, axles or nuts are loosened while riding, this is usually accompanied by a
characteristic sound coming from the chassis or other part of the skate. In this case, stop skating and check and tighten all bolts, axles and nuts. We recommend that you always have the appropriate
19. For safety reasons, we do not recommend using headphones while skating.
skate maintenance equipment before and during the ride. Failure to follow this instruction may
result in the wheels and chassis coming loose, except for the loss of wheels and bolts (these cases
are not covered by the claim), serious injuries may result. "
III. Care instructions
1. Use the ice skates on a well-tended and clean ice only or it can come to a damaging of the ice skates and to your injury.
2. It is not recommended to use the ice skates on a body of water where you are not sure about the depth. It could come to a break of the ice and folowing injury (drowning).
3. Move with an unprotected blade on a clean ice only. If you want to walk on the ground, use the blade protectors.
4. It can come to a small peel off of the material that is used for a surface adjustment of the blade during the sharpening process. This is not a reason for placing a claim.
5. Use strictly only professional services for sharpening, by non-professional sharpening, it can come to an irretrievable damage of the blade.
IV. Care instructions for the sports roller skates/ice skates
1. The skates need regular maintenance.
2. In case of a need for any repair, we strongly recommend letting the skates to be repaired in a specialized service.
3. Wipe the inner shoe and skeleton with a cloth soaked in a soap water after every ride and let it dry in a room temperature. Take care of the leather parts with a cleaning product suitable for taking care of leather.
4. Cleaning of the bearings see II. Use instructions number 9. (Not valid for ice skates)
5. Maintenance of the bearings by the roller skates – change the wheels after their wearing down in following order: 1st with 3rd, 2nd with 4th and turn them simultaneously for 180°. (Not valid for ice skates)
6. Don't put the skates or their parts anywhere near the heat sources, it could come to an irretrievable damage!
TEMPISH company supplies wide net of services and sports shops with a large offer of wheels, bearings, and other spare parts for the TEMPISH roller skates.
SETTING THE STIFFNESS OF TRUCKS AND QUAD SKATES
Adjusting the stiffness of the quad skates trucks:
Most of the quad skates have an adjustable chassis. Every quad skate truck is held to the frame between two rubber cushions. The stiffness of the trucks can be easily regulated using a key of the size of 13 mm or
14 mm. The adjustment of the quad skates is individual, everyone prefers a slightly different adjustment. In general said, greater tightening of the trucks increases the stiffness and also manageability, but you will
have to apply greater force during turning. Conversely, loosened trucks allow easy turning and more freedom to the detriment of maneuverability. Adjusting the stiffness of the trucks is not complicated. In the case
of quad skates, you may encounter two types of fastening of the trucks to the frame, type „A" and type „B", see the image.
