Crux ARTISAN Serie Manual De Instrucciones página 12

PROGRAMMING FUTURE BREW
1. Press and hold the PROGRAM button. The button will illuminate white; PROGRAM appears
on the left side of the display.
2. The default "12" or previously set HOURS will begin to flash. Rotate the SELECT dial until
the current HOUR is displayed. (NOTE: Pay attention to AM and PM.)
3. In 5 seconds, the MINUTES will begin to flash. Rotate the SELECT dial until the current MINUTES
are displayed.
4. In 5 seconds, if no buttons are pressed, the Future Brew TIME set will be displayed.
NOTE: The white illuminated PROGRAM button indicates the Coffee Maker is set and ready
to brew.
5. Once the current TIME reaches the pre-programmed Future Brew TIME, the Coffee Maker will
begin the brew cycle. The white PROGRAM button will turn OFF. The BREW/OFF button will
illuminate white and any other pre-programmed choices will be displayed.
6. To cancel Future Brew, press either the white illuminated PROGRAM button or press the BREW/
OFF button to begin brewing immediately.
BREW STRENGTH SELECTION (REG / BOLD)
1. Brew Strength will automatically default to REG (regular).
2. To change, turn the SELECT dial until REG begins to flash.
3. Press the PROGRAM button and BOLD will flash. In 5 seconds, if no buttons are pressed, BOLD
brew strength will be programmed.
1- 4 CUP MODE
IMPORTANT: The 1- 4 Cup Mode must be programmed immediately before brewing.
1. When brewing 1 to 4 (5 oz.) cups of coffee, the 1 - 4 Cup Mode automatically adjusts the brewing
process for maximum flavor.
2. Turn the SELECT dial until "1 - 4" appears on the right side of the display.
3. Press the BREW/OFF button to begin brewing immediately.
NOTE: The Coffee Maker will not measure water quantity. When using the 1 - 4 Cup Mode,
the entire water tank will brew.
KEEP WARM CYCLE
1. After brewing, the Coffee Maker will advance to a 2:00 hour KEEP WARM cycle.
KEEP WARM may be pre-programmed from 0:00 to 4:00 hours in 30 minute increments.
2. To change, turn the SELECT dial until KEEP WARM appears on the lower right side of the display.
After 5 seconds the last programmed KEEP WARM time will begin to flash on the display.
3. Turn the SELECT dial until the new desired KEEP WARM TIME is displayed.
4. In 5 seconds, if no buttons are pressed, KEEP WARM TIME will be programmed.
AUTO SHUT OFF
The Coffee Maker will automatically shut OFF once the KEEP WARM TIME has elapsed after brewing.
SETTING THE INDICATOR BEEP SOUND
Rotate the knob to the
flash, press the "program" button to turn off the indicator beep sound, the unit will return to standby
mode and the icon will show on LCD display. To turn on the indicator beep sound, rotate the
knob to position. The
indicator beep sound, the
position, the LCD will show "time", "reg" and
will show on the LCD display, press the "program" button to turn on the
will disappear from LCD display and return to standby mode.
10
icons. The icon will