Idiomas disponibles
Idiomas disponibles
- Remove the horizontal and vertical augers as shown in pic.14-15-16-17-18-19;
-
Dip all parts in a solution of warm water and bleach (10 gr/litre of water);
-
Prepare some other solution of warm water and bleach (10 gr/litre of water) and dip a cloth in it. This will be used
to clean the steel tank and the parts connected to it (pic.20);
-
Wash with fresh water and dry all washed parts;
-
Use a damp cloth to clean all the external parts;
-
Reassemble the machine.
Lubricate the points indicated in fig. 21 (auger mechanism and front side of the horizontal auger) with food-
grade Vaseline, to avoid any eventual noise (whistle) due to friction between the two plastic elements.
- Connect the machine to the power supply.
On removing the piston from the container, carefully follow the steps in the images below to dismantle the shaft seal.
The tool in the images is provided with the Quickream machine.
After disassembly, wash the seal and the piston housing as described in the cleaning paragraph and reassemble the
parts.
Disassembling the piston seal for cleaning
1
4
7
2
5
- 25 -
3
6
