Operation; Examine The Chain Oil; Start The Machine; Stop The Machine - Bad Boy PS80B120A10 Manual Del Operador

EN
8

OPERATION

Remove the battery pack and keep hands clear of the
lock out button when you move the machine.
Examine the chain tension before each use.
8.1

EXAMINE THE CHAIN OIL

Do not use the machine without sufficient chain oil.
1. Examine the oil level of the machine from the oil
indicator.
2. Add oil if necessary.
8.2

START THE MACHINE

1. Press the lock-out button (1).
2. Press the trigger (2) while you hold the lock-out
button.
3. Release the lock-out button.
8.3

STOP THE MACHINE

1. Release the trigger to stop the machine.
8.4

DELIMBING A TREE

NOTE
IMPORTANT
NOTE
B
A
English
Make sure that there is nothing or nobody in the area
where the branches fall.
• Stand opposite of the branch you will cut.
• Start to cut the higher branches.
• Then cut the lower branches.
• Cut downwards to prevent the bar from jamming.
8.5

LIMB TREE BRANCHES

Limbing is to remove the branches from a fallen tree.
1. Keep the larger lower branches to hold the log off
the ground.
2. Remove the small limbs in one cut.
3. Limb the branches with tension from the bottom to
up.
4. Keep the larger lower branches as a support until
the log is limbed.
9

MAINTENANCE

Do not let brake fluids, gasoline, petroleum-based
materials touch the plastic parts. Chemicals can
cause damage to the plastic, and make the plastic
unserviceable.
Do not use strong solvents or detergents on the plastic
housing or components.
Remove the battery pack from the machine before
maintenance.
9.1

ADJUST THE CHAIN TENSION

Wear protective gloves if you touch the chain, bar or
areas around the chain.
10
WARNING
A
A
CAUTION
CAUTION
WARNING
CAUTION