Description; Purpose; Overview; General Power Tool Safety Warnings - Bad Boy PS80B120A10 Manual Del Operador

EN
1

DESCRIPTION

1.1

PURPOSE

This product is a cutting implement mounted on a pole
to enable the operator to cut the branches of standing
trees. It is not intended for use as a regular chainsaw.
1.2

OVERVIEW

Lock-out button
1
Trigger
2
Scabbard
3
Pole saw handle
4
Collar
5
Extension pole
6
2 GENERAL POWER TOOL
SAFETY WARNINGS
Do not operate near electrical power lines. The
unit has not been designed to provide protection
from electric shock in the event of contact with
overhead electric lines, Consult local regulations for
safe distances from overhead electric power lines and
ensure that the operating position is safe and secure
before operating the saw chain pole pruner.
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
battery-operated (cordless) power tool.
Pole saw head
7
Chain cover knob
8
Oil tank cap
9
10 Bar
Chain
11
WARNING
WARNING
English
2.1

GENERAL SAFETY RULES

• Avoid Dangerous Environment – Don't use
appliances in damp or wet locations.
• Don't Use In Rain.
• Keep Children Away – All visitors should be kept at
a distance from work area.
• Dress Properly – Do not wear loose clothing or
jewelry. They can be caught in moving parts.
Use of rubber gloves and substantial footwear
is recommended when working outdoors. Wear
protective hair covering to contain long hair.
• Use Safety Glasses – Always use face or dust mask
if operation is dusty.
• Use Right Appliance – Do not use appliance for any
job except that for which it is intended.
• Avoid Unintentional Starting – Don't carry plugged-in
appliance with finger on switch. Be sure switch is
off when plugging in. Carrying the appliance with
your finger on the switch or energizing appliance
that have the switch on invites accidents.
• Don't grasp the exposed cutting blades or cutting
edges when picking up or holding the appliance.
(For grass shears and similar appliances only.)
• Don't Force Appliance – It will do the job better and
with less likelihood of a risk of injury at the rate for
which it was designed.
• Don't Overreach – Keep proper footing and balance
at all times.
• Stay Alert – Watch what you are doing. Use
common sense. Do not operate appliance when you
are tired.
• Disconnect Appliance – Disconnect the appliance
from the power supply when not in use, before
servicing, when changing accessories such as
blades, and the like.
• Store Idle Appliances Indoors – When not in use,
appliances should be stored indoors in dry, and high
or locked-up place – out of reach of children.
• Maintain Appliance With Care – Keep cutting edge
sharp and clean for best performance and to reduce
the risk of injury. Follow instructions for lubricating
and changing accessories. Keep handles dry, clean,
and free from oil and grease.
• Check Damaged Parts – Before further use of the
appliance, a guard or other part that is damaged
should be carefully checked to determine that it will
operate properly and perform its intended function.
Check for alignment of moving parts, binding of
moving parts, breakage of parts, mounting, and any
other condition that may affect its operation. A guard
or other part that is damaged should be properly
repaired or replaced by an authorized service center
unless indicated elsewhere in this manual.
• Keep all parts of the body away from the saw chain.
Do not remove cut material or hold material to be
cut when blades are moving. Make sure the switch
is off when clearing jammed material. Saw chain
4