LIVERANI PONY FLOW Instrucciones De Montaje página 10

· Language
· Pulses per liter (always set pulses per liter value, also
while reading cbm/h or gallons/minute, conversion will
be done automatically by the instrument)
· Unit Measure
· Highlight
· Lighting Time
· Brightness
· Extinction Time
· Decimals
m) It accepts a sinusoidal wave signal.
n) Current input while in stand-by under 1 mA.
o) Current input while in function with 0 lighting parameter
is 2 mA.
p) Current input while in function with 5 lighting parameter
is 8 mA.
q) Current input while in function with 10 lighting
parameter is 13 mA.
r) When the battery is exhausting a symbol of battery alarm
appears on the display, on the upper right side.
s) It accepts a decimal number to set pulses/liter.
FUNCTIONING OF THE KEYS
Green key
a) It can be pressed to turn on the instrument, as any other
key.
b) If pressed in the Reading Menu allows to enter the Setting
Menu.
c) If pressed in the Setting Menu at Page 1 allows to enter
the Setting Menu at Page 2.
d) If pressed in the Setting Menu at Page 2 allows to come
back to the Reading Menu.
Red Key
a) Slipping of parameters at pages 1 and 2 of the Setting
Menu.
b) RESET of total resettable units (PARTIAL).
Blue Key
a) Change of parameter, at pages 1 and 2 of Setting
Menu.
Blue Key
a) Change of parameter, at pages 1 and 2 of Setting
Menu.
READING MENU
Messages contained in this paragraph concerns setting
of "liters" as Unit Measure. Once you have turned the
instrument on, the display is in the Reading Menu.
Reading Menu displays Partial Units "Flow[ l/min ]", Total
Units resettable "Partial [ l ]" and Total Units non-resettable
"Total [ l ]".
You can enter the Setting Menu by pressing the green key
for a while.
SETTING MENU
It provides 8 parameters on 2 pages:
PAGE 1
1) Setting of the language: Italian, English, French, Deutsch,
Spanish, Portuguese, Russian, Polish.
2) Setting of pulses per liter.
3) Setting of Unit Measure: Liter/min. – Cubic meter/H
- Gallons/min.
4) Setting the reading parameter during the passage of liquid
inside the ow meter.
The selected parameter among Partial Units – Total –
Flow allows the following reading options during the
passage of liquid inside the ow meter:
- Selection "Partial [ l ]"
Flow [ l/min ]
Partial [ l ]
- Selection "Total [ l ]"
Flow [ l/min]
Total [ l ]
- Selection "Flow [ l/min]"
Partial [ l ]
Flow [ l/min ]
4a) Select the value to be highlighted during the passage of
liquid inside the ow meter.
PAGE 2
5) Setting of Lighting Time (max. 600 seconds).
6) Setting of Brightness (from 0 to 10).
7) Setting of Extinction Time (max. 600 seconds).
8) Setting of number of decimals (0 - 0,0 - 0,00) displayed
in the Reading Menu.
OPERATIVE PHASE:
1a) Turn the instrument on;
1b) Press the green key
page 1;
1c) Select the language wished by pressing the blue keys
and ;
1d) Press the red key
message.
2a) Press the keys
2b) Press the red key
parameter.
10
highlighted.
highlighted.
highlighted.
to enter the Setting Menu,
to allow direct passage to next
and to set pulses per liter;
to allow direct passage to next