•
Regularly check the appliance for possible
damage.
•
Hold the milk frothing unit as shown to
clean it under running water (fig. C). Clean
the heating element with the cleaning brush.
Thoroughly dry the milk frothing unit.
•
Remove the stirrer from the milk frothing
unit. Clean the stirrer with a soft, damp
cloth and a few drops of washing-up liquid.
Thoroughly dry the stirrer. Mount the
stirrer to the milk frothing unit.
•
Clean the stand, the milk jar and the jar
holder in soapy water. Thoroughly dry the
accessories.
•
After cleaning, put the appliance in the
original packaging.
•
Store the appliance in a dry and frost-free
place, out of the reach of children.
Automatic cleaning function (fig. A)
Before you proceed, we would like you to
focus your attention on the following notes:
-
Before automatic cleaning, make sure that
the stand is mounted to the milk frothing
unit.
•
Fill the milk jar (7) with 375 ml of water.
•
Place the milk frothing unit (3) into the
milk jar (7).
•
Place the milk jar (7) into the jar holder (9).
•
Insert the mains plug into the wall socket.
•
Press the AUTO CLEAN button (2). The
AUTO CLEAN button (2) flashes blue. The
appliance starts the automatic cleaning
function.
•
If the process is completed, the appliance
will go to stand-by mode. The HEAT/FROTH
button (1) lights red. The AUTO CLEAN
button (2) lights blue.
•
Remove the mains plug from the wall socket.
Safety instructions
General safety
•
Read the manual carefully before use.
Keep the manual for future reference.
•
Only use the appliance and the accessories
for their intended purposes. Do not use the
appliance and the accessories for other
purposes than described in the manual.
•
Do not use the appliance if any part or any
accessory is damaged or defective. If a part
or an accessory is damaged or defective, it
must be replaced by the manufacturer or
an authorised repair agent.
•
Children should be supervised to ensure
that they do not play with the appliance.
•
The use of this appliance by children or
persons with a physical, sensory, mental or
motorial disability, or lack of experience
and knowledge can give cause to hazards.
Persons responsible for their safety should
give explicit instructions or supervise the
use of the appliance.
•
Do not use the appliance near bathtubs,
showers, basins or other vessels containing
water.
•
Do not immerse the appliance in water or
other liquids. If the appliance is immersed
in water or other liquids, do not remove the
appliance with your hands. Immediately
remove the mains plug from the wall socket.
If the appliance is immersed in water or
other liquids, do not use the appliance again.
•
This appliance is intended to be used in
domestic and similar applications such as
staff kitchen areas in shops, offices and
other working environments; farm houses;
by clients in hotels, motels and other
residential type environments; bed-and-
breakfast type environments.
Electrical safety
•
Before use, always check that the mains
voltage is the same as the voltage on the
rating plate of the appliance.
•
The appliance is not intended to be
operated by means of an external timer or
separate remote-control system.
•
Connect the appliance to an earthed wall
socket. If necessary, use an earthed
extension cable of a suitable diameter
(at least 3 x 1 mm
2
).
•
Make sure that water cannot enter the
contact plugs of the mains cable and the
extension cable.
•
Always fully unwind the mains cable and
the extension cable.
10