Parts
Depth
Impact-Rotation
Control Rod
Selector
Handle
Chuck
Speed
Continuous
Rotation
Auxiliary
Control
Operation Button
Selection
Handle
Button
Power Cord
Protector
Switch
Power
Cable
Chuck Key
Holder
Chuck
Key
Preparation
Auxiliary Handle and Depth Control Rod Assembly
3
1. Turn the auxiliary handle in a
Depth
clockwise direction while released so
Control Rod
that the opening in the mount gets
through freely over the chuck.
Steps 1 & 2
2. Insert the hammer drill head
through the auxiliary mount.
Mount
3. Insert the depth control rod into
the mount orifice.
4. Rotate the auxiliary handle
4
together with its mount until is set in
the right position to operate the tool.
The auxiliary mount is secure when
the handle notches assemble in the
gearbox.
5. Turn the auxiliary handle to firmly
set the mount onto the hammer drill
head.
Auxiliary
5
Handle
6
ENGLISH
