Manuales relacionados para Truper ROTO-1/2A10
Resumen de contenidos para Truper ROTO-1/2A10
- Página 1 Manual Hammer drill 0.8 Hp 1/2” Power Chuck Applies for: Code Model 101273 ROTO-1/2A10 ROTO-1/2A10 Read this manual thoroughly CAUTION before using the tool.
-
Página 2: Tabla De Contenido
Manual before Parts using the tool. Start up Keep this manual for future references. Maintenance The illustrations in this manual are for reference Notes only. They might be different from the real tool. Authorized Service Centers Warranty policy ROTO-1/2A10 ENGLISH... -
Página 3: Technical Data
Technical data ROTO-1/2A10 Code 101273 Description Hammer drill Chuck 1/2” Voltage 127 V Frequency 60 Hz Current Power 0.8 Hp Speed Drill: 0 - 3 000 RPM Hammer drill: 0 - 48 000 BPM Boring capacity Concrete: 1/2” Steel: 1/2” Wood: 1”... -
Página 4: General Power Tools Safety Warnings
General power tool safety warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references. -
Página 5: Safety Warnings For Drills And Hammer Drills
Safety warnings for drills and hammer drills Choose the right bit While operating the hammer drill CAUTION • Choose the right bit for the work piece. • Use the auxiliary handles, if supplied with the tool. It reduces the risk of severe injury and makes the job easier. Loss of control may result in personal injury. -
Página 6: Parts
Parts Impact-rotation selector Continuous use button Chuck Rotation direction button Speed control Switch Handle Chuck Power Cord wrench Protector Chuck Power key holder cord ENGLISH... -
Página 7: Start Up
Start up Chuck Bit fitting • Put the bit into the chuck until it stops. Fasten with the chuck wrench and tighten alternately the chuck into each of the orifices. WARNING Clean the burrs and any other foreign objects of the drill and the broker, otherwise the drill cannot get tight and cuse serious personal injury. - Página 8 Start up Wood drilling Masonry drilling • To make holes of 1/4" or less it is recommended to use • Use tungsten carbide-tipped masonry act bit when high speed bits. To make holes larger than 1/4", it is drilling holes in brick, tile, concrete,etc. recommended to use spade bits for wood.
-
Página 9: Maintenance
Maintenance Chuck Replacement • Remove the auxiliary handle. • Open the chuck jaws all the way. • Using a screwdriver remove the left-threaded safety screw with a clockwise movement. Phillips Screwdriver • Fit the long side of an “L” (not included) Allen key in a vise. -
Página 10: Notes
Notes ENGLISH... -
Página 11: Authorized Service Centers
In the event of any problem contacting a Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 0187-8737 to get information about the nearest Service Center. DE TODO PARA LA CONSTRUCCIÓN FIX FERRETERÍAS... -
Página 12: Warranty Policy
. Transportation costs resulting from compliance of this warranty will be covered by For questions or comments, call 800-690-6990. Made in China. Imported by Truper S.A. de C.V. Parque Industrial 1, Jilotepec, Edo. de Méx. C.P. 54240 Stamp of the business.