Sharp XParty PS-949 Manual Del Usuario página 6

5
Box contents
• XParty Street Beat PS-949 Party Speaker
• Power cable
• Microphone
• Microphone holders (x2)
• User documentation
Controls
(Refer to 1 on page 1).
1. Phone/tablet holder slot
2.
Press the button to skip to the next playing track.
Long press to fast forward the current track. Bluetooth and USB only.
3.
Press the button to play or pause the playback.
Bluetooth and USB only.
4.
Press the button to skip to the previous playing track.
Long press to fast rewind the current track. Bluetooth and USB only.
5.
Press to change input volume for Mic 1.
Press to select Mic 1 (for volume adjustment).
6.
Press to change input volume for Mic 2.
Press to select Mic 2 (for volume adjustment).
7. Duo Mode /TWS
Press to initiate Duo Mode pairing.
Long press the button to disconnect the Duo Mode connection.
8. REVERB
Press to turn on and cycle reverb on/off options for inputs.
Long press to turn off for all inputs.
Turn the control knob to change the reverb level.
NOTE:
ū Applies only for Mic 1 and 2 inputs
9. SUPER BASS
Press to boost the bass. Press again to turn off.
10.
Press to mute the sound. Press again to unmute sound.
11. EQ
Press to cycle through preset EQ options.
POP, DANCE, ROCK, LIVE, CLUB and FLAT.
12. DJ FX
Press 1, 2, 3, 4, 5, 6 to play the DJ effect.
NOTE: There are 12 effects available on the XParty Street Beat. You
can use the Sharp Life App to assign your favourite 6 effects to the
button of your choice.
13. Control Knob
Rotate to adjust the volume level or selected parameter.
Parameters are:
Mic 1 Volume.
Mic 2 Volume. Reverb level.
14.
Press to select the mode (Bluetooth , Aux-in, USB).
©
15.
Press to turn the strobe light ON/OFF.
Long press to activate the "Strobe Blast" effect for five seconds.
16.
Long press to turn the power ON/OFF.
17.
LED light effects. Press to cycle through:
Rollerz, Glow, Infinity, Blink, Club, Prism and Lights Out.
NOTE:
ū You can use the Sharp Life App to preview and select the light effect.
LCD panel
(Refer to 2 on page 1).
1.
Displayed when Bluetooth mode is active.
Flashes when in Bluetooth Pairing mode.
2.
Displayed when Bluetooth or USB is playing.
3.
Displayed when Bluetooth or USB is paused.
4. DUO
Displayed when Duo Mode is active.
Flashes when Duo Mode is pairing.
5. USB
Displayed when USB mode is active.
6. AUX
Displayed when AUX mode is active.
7.
Displayed when a device is connected to the Mic 1 input.
Icon flashes when the reverb effect is turned on for Mic 1.
8.
Displayed when a device is connected to the Mic 2 input.
Icon flashes when the reverb effect is turned on for Mic 2.
9. REVERB
Displayed when Reverb is set to ON.
The Reverb effect is only applied to the MIC inputs.
10.
Displayed when the speaker is muted.
11.
Displays the battery charge level.
Flashes when being charged.
Does not flash when fully charged.
12.
Displays the parameter value of the operation being conducted.
Inputs/Outputs
(Refer to 3 and 4 on page 1).
1. Mic 1 - Microphone, Guitar or other 6.3mm TRS input
2. Aux in (3.5mm)
3. USB input